Lee

MAGNUMLEE TRIMMER GAUGE 338 LAPUA

LEE TRIMMER GAUGE 338 LAPUAMAGNUMFEATURES-For .338 Lapua Magnum-Case Length Gauge-Precise, easy way to trim to length & square the case mouth-Used with the Cutter & Lock Stud or Zip Trim

AUTO-DISK POWDER MEASURELEE LONG CHARGING DIE FOR

LEE LONG CHARGING DIE FORAUTO-DISK POWDER MEASUREFEATURES-Long charging die for use with the Auto-Disk, Pro-Disk and Auto-Drum Powder Measure-Works with cases 1.760 to 2.620" long-.223 Remington to ...

Lee Precision 90768 Pacesetter 2-Die Set 8mm Lebel

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, powder dipper and instructions/load data.

Lee Precision 90892 Bullet Feed Kit 30 - 32 Cal Bullets , Lengths to .60" Long

The Bullet Feed Kit is complete for one bullet diameter and range of length. To convert to another caliber or bullet length select appropriate Feed die & finger.

Lee Precision 90026 Lead Ladle Steel w/Wood Handle

Lee's Lead Ladle is a convenient size ladle for bullet casting and works equally well for right and left handers. It is handy for skimming and stirring metal.

Lee Precision 91567 Gauge Holder 350 Legend

Lee's 350 Legend Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit. Trim to length...

Lee Precision 90933 Automatic Processing Press

The Lee Deluxe Automatic Processing Press allows you to deprime, primer pocket swage, bulge bust or size cast bullets as fast as you can operate the lever. The upper die carrier is counter balanced...

Lee Precision Breech Lock 3-Die Set 40 S&W

Lees 40 S&W Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal...

LEE TRIMMER GAUGE 35 WHELEN

LEE TRIMMER GAUGE 35 WHELENFEATURES-For .35 Whelen-Case Length Gauge-Precise, easy way to trim to length & square the case mouth-Used with the Cutter & Lock Stud or Zip Trim

Lee Precision 90304 Classic Turret Press Kit 4 Hole

The Classic Turret Press is fast and convenient when loading handgun cartridges, with rates in excess of 250 rounds per hour possible. The kit includes the Auto-Drum powder measure and Powder Measure...

Lee Precision 90140 Case Length Gauge 30-06 Springfield Steel Works With Zip Trim Includes Shell Holder

Lee 30/06 Springfield Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.474 to 2.494 inches.

Lee Precision 90961 Collet Die Only 300 Win Mag

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

LEE RAM PRIME DIE

LEE RAM PRIME DIEFEATURES-Fits all brands of single station presses-For both large & small primers-Uses the Universal Shell Holders

Lee Precision 90130 Case Length Gauge 7x57mm Mauser Steel 0.07 lbs

Lee 7X57 MAUSER Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.215 to 2.235 inches.

Lee Precision 90362 Double Cavity Mold .309 Diameter-113 Grain Flat Nose

Lee Precision 90453 Quick Change Drum Set Black Nylon Works With Classic/Auto Drum Powder Measure

Lee's Quick Change Drum Set features four precision molded nylon drums with their own metering chamber. These nylon drums replace the brass drum and are handy if you have a load you use frequently...

Lee Precision 90758 Pacesetter 2-Die Set 32-40 Win

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder and instructions/load data.

Lee Precision 92173 Ultimate Turret Press Kit 38 Special

Lee Precision 90725 Bottle Neck Factory Crimp Die 5.7X28 FN

This Factory Collect Style Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp...

Lee Precision 90039 Classic Bullet Sizing Kit .311

Lee's Lube & Size Kit allows you to lubricate and size cast bullets. It can also seat and crimp gas checks. Intended for use on single stage presses only, the sizer die has standard 7/8 x 14...

Lee Precision 90195 Double Disk Kit

This kit raises the hopper so you can stack two disks. It not only doubles the capacity of the disks but it makes very fine adjustments possible. Most powders can be adjusted up or down .1 grain with...

Lee Precision 90486 Mold 00 Buckshot 18 12 Gauge Steel w/Wood Handle Capacity 18 Linked Pellets

Lee's eighteen cavity 00 Buck shot mold produces 18 linked pellets per cast. No need to individually count pellets simply snip three strands into your 12 gauge shell. Each cast produces enough...

Lee Precision 90564 Pacesetter 3-Die Set 44-40 Win

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90735 Factory Crimp Die 6.8 SPC

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...