Tools

CVA Trophy Bullet Starter

Quiet non-abrasive non-glare polymer. Short and long starter are recessed to fit over most bullets.

CVA UNIVERSAL LOADING TIP FOR RAMRODS

Universal Loading Tip for Ramrods.

Muzzleloading Technologies Quick Valve (Flush Tube & Valve)

Muzzleloading Technologies Quick Valve (Flush Tube & Valve)

TC Arms 45/50 Caliber Ball Bullet and Wad Puller 9069R

TC Arms 45/50 Caliber Ball Bullet and Wad Puller 9069RTC Arms ball, bullet, and wad puller 9069R is for .45 and .50 caliber muzzleloader work with 10-32 threads.A brass bore guide centers the pointed...

Thompson Center 209 Primer Caddy 9043R

Thompson Center 209 Primer Caddy 9043RT/C 209 Primer Caddy stores a reserve of #209 primers for muzzleloader shooting.Thompson/Center designed it to keep primers dry, clean, and easy to find in a...

PALM SAVER BLACK POLYMERHARVESTER BULLET STARTER &

HARVESTER BULLET STARTER &PALM SAVER BLACK POLYMER

IN-LINE IGNITION RIFLES BRASSTRADITIONS NIPPLE PICK FOR

TRADITIONS NIPPLE PICK FORIN-LINE IGNITION RIFLES BRASSFEATURES-Brass body-Push-up slide extends nipple pick at angle to reach in-line rifle nipples

TRAD STRAIGHT LINE CAPPER

Straight Line Capper. Solid brass body carries fifteen #11 caps ready for precise dispensing.

Traditions A1795 Hammer Extension Vortek, Pursuit, Buckstalker, Yukon Muzzleloader Stainless Steel

Traditions' hammer extension screws into the hammer of the Vortek, Pursuit, Buckstalker or Yukon muzzleloader to allow you to pull back the hammer when using a scope. The extension will screw into...

CVA AC1677 Capper/Extractor Tool 209 Primers Steel Black

CVA's Capper/Extractor tool allows for easy capping and removal of 209 shotshell primers and will work on any brand of in line muzzleloader.

FOR CVA INLINE RIFLESCVA OPTIMA BREECH PLUG WRENCH

CVA OPTIMA BREECH PLUG WRENCHFOR CVA INLINE RIFLESFEATURES-Hex head -Made from solid steel-Assists in complete take down of CVA in-line rifles-This wrench is for the Accura, Optima, Optima Pro,...

CVA In-Line /Sidelock Combo Nipple Pick

Heavy wire mounted in a solid brass handle works on all blackpowder rifles.

Thompson Center Arms U-View Flex Loader 45 or 50 Caliber 9053R

Thompson Center Arms U-View Flex Loader 45 or 50 Caliber 9053RT/C Arms U-View Loader carries prepared muzzleloader charges and #209 primers for .45 or .50 caliber rifles.Thompson/Center describes a...

CVA STRAIGHT LINE CAPPER RANGE MODEL

All brass construction. Holds 15 #11 caps.

#11 CAPS M6X1 THREADS S/STRADITIONS NIPPLES 2-PACK FOR

TRADITIONS NIPPLES 2-PACK FOR#11 CAPS M6X1 THREADS S/SFEATURES-Fits all Traditions™ muzzleloaders & pistols-For M6x1 threads & #11 caps-Not for use with Thunder Dome™ breech plug

TRAD PALM SAVER

Wooden handle fits over ramrod to relieve pressure on your hand when loading projectiles.

5MM TRADITIONS/CVA FLINTLOCKTRADITIONS TOUCH HOLE LINER

TRADITIONS TOUCH HOLE LINER5MM TRADITIONS/CVA FLINTLOCK

Traditions A1421 Nipple Wrench In Line Rifle Universal Steel Black

A double-ended wrench for in-line muzzleloaders. Lightweight, easy to carry. Fits most sidelocks as well as #11 and musket nipple.

Knight Rifles M900068 Black Anodized Bullet Loading Tip

Knight Rifles M900068 Black Anodized Bullet Loading TipKnight muzzleloading bullet loading tip M900068 protects polymer-tipped bullets while seating loads down the bore.The black anodized tip threads...

T-HANDLE STYLE WOOD/BRASSTRADITIONS BALL STARTER

TRADITIONS BALL STARTERT-HANDLE STYLE WOOD/BRASSFEATURES-Traditional design-Solid hardwood & brass-Sure grip to start most balls or bullets

CASE NECK BRUSH POWER SCREWDRIVER ACCESSORY HANDLE ONLY

ACCESSORY HANDLE & POWER ADAPTER

CVA 209 OPTIMA BREECH PLUG

CVA 209 OPTIMA BREECH PLUGFEATURES-209 Hex head-ONLY for Pivot-Action & Break-Actions made in *2009 & before-These models would include: -Optima, Optima Pro, Wolf, Kodiak, Kodiak Pro*The last two...

TUBES 6PKTC MAGNUM POWDER CHARGING

TC MAGNUM POWDER CHARGINGTUBES 6PK

Barnes Bullets 30678 Spit-Fire MZ Alignment Tool 50 Cal Muzzleloader 0.75" Brass

Barnes Spit-Fire MZ Aligner Tool enhances the accuracy of high performance 50 Cal bullets. This aligner will align your bullet to the centerline of your bore as well as perfectly match the ogive on...

Traditions Muzzleloader Bore Light 0 for .50 cal. Or larger

Traditions? LED Bore Light is brighter and provides 500 hours of use. This tool makes it easy to inspect your bore and is an essential tool for all muzzleloader users. For .50 caliber muzzleloaders...

Barnes Spitfire TMZ & T-EZ Muzzleloader Aligner Tool - .50 cal. 0.85 Length

The Barnes MZ Aligner enhances the accuracy of these high performance muzzleloading bullets. A separate Aligner Tool is required for each caliber and bullet type.

CAMP CBG-LMS-SHOT SHOT GLASS W/ BULLET

Barnes Bullets 30661 Alignment Tool 50 Cal Muzzleloader 0.75" Brass

Barnes Expander MZ Aligner Tool enhances the accuracy of high performance .50 Cal bullets. This aligner will align your bullet to the centerline of your bore as well as perfectly matching the ogive...

Barnes Spitfire MZ Muzzleloader Aligner Tool - .45 cal. 0.75 Length

The Barnes MZ Aligner enhances the accuracy of these high performance muzzleloading bullets. A separate Aligner Tool is required for each caliber and bullet type.

Barnes Spitfire MZ Muzzleloader Aligner Tool - .54 cal. 0.75 Length

The Barnes MZ Aligner enhances the accuracy of these high performance muzzleloading bullets. A separate Aligner Tool is required for each caliber and bullet type.

Traditions Deluxe Bullet Starter Kit for Muzzleloaders A1861

Traditions Deluxe Ball Starter A1861 can be threaded on to the end of your ramrod to turn it into a range rod or you can use it as a bullet starter. The polymer handle is comfortable and fits your...

Knight Breech Plug Hex Head - 45/50 LK MK

Continuing in our tradition of bringing innovation to the muzzleloading industry we redesigned our breech plugs to better accommodate todays modern black powders. Now you can shoot more and clean...

TRAD LIGHTNING FIRE MUSKET NIPPLES

Fits Traditions In-line muzzleloaders with M6x1 threads.

Traditions A1291 Field Capper Muzzleloader Brass #11 Percussion

Tradition's Field Capper is compact and is constructed of solid brass. It holds 10 #11 caps.

WINDAGE SCREWDRIVER W/WOOD HANDLE

WINDAGE SCREWDRIVER

TC IN-LINE NO.11 CAPPER BRASS

TC IN-LINE NO.11 CAPPER BRASS