Dies

Lee

Lee 90780 Taper Crimp Pistol Die 9mm Luger/38Sup/38ACP/380 Auto

The Lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already modified taper crimp. Jacketed bullets must...

Lee

Lee 90781 Taper Crimp Pistol Die 357/38 Special

The Lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already modified taper crimp. Jacketed bullets must...

Lee

Lee 90782 Taper Crimp Pistol Die 40 S&W/10MM

The Lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already modified taper crimp. Jacketed bullets must...

Lee

Lee 90784 Taper Crimp Pistol Die 44 Rem Mag/44Spc

The Lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already modified taper crimp. Jacketed bullets must...

Lee

Lee 90785 Taper Crimp Pistol Die 45 ACP/45 Auto Rim/45 Sch/455 Web/45 Win

The Lee taper crimp dies is hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already a modified taper crimp. Jacketed bullets...

Lee

Lee 90302 Collect 45 Colt Crimp Die Set

This Collect Die is popular with cast bullet shooters that wish to use over size bullets also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or...

Lee

Lee 90421 Factory Crimp Rifle Die 30 M1 Carbine

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90421 FACT...

Lee

Lee 90590 Crimp Die Factory Crimp Rifle Die 300 AAC Blackout

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90590 FACT...

Lee

Lee 90704 Factory Crimp Rifle Die 6.5 Creedmoor

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90704 FACT...

Lee

Lee 90735 Factory Crimp Rifle Die 6.8mm Remington SPC

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90735 FACT...

Lee

Lee 90813 Collect 357 Remington Magnum Crimp Die Set

This Collect Die is popular with cast bullet shooters that wish to use over size bullets also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or...

Lee

Lee 90815 Factory Crimp Pistol Die 458 Socom

Lee's 458 Socom Factory Crimp Die crimps the bullet in place more firmly than any other tool. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform...

Lee

Lee 90817 Factory Crimp Rifle Die 223 Remington

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90817 FACT...

Lee

Lee 90818 Factory Crimp Rifle Die 22-250 Remington

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90818 FACT...

Lee

Lee 90819 Factory Crimp Rifle Die 243 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90819 FACT...

Lee

Lee 90820 Factory Crimp Rifle Die 270 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90820 FACT...

Lee

Lee 90821 Factory Crimp Rifle Die 7mm Remington Magnum

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90821 FACT...

Lee

Lee 90822 Factory Crimp Rifle Die 30-30 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90822 FACT...

Lee

Lee 90823 Factory Crimp Rifle Die 308 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90823 FACT...

Lee

Lee 90824 Factory Crimp Rifle Die 30-06 Springfield

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90824 FACT...

Lee

Lee 90825 Factory Crimp Rifle Die 300 Winchester Magnum

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90825 FACT...

Lee

Lee 90827 Factory Crimp Rifle Die 7.62X39 Russian

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90827 FACT...

Lee

Lee 90829 Factory Crimp Rifle Die 22 Hornet

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90829 FACT...

Lee

Lee 90839 Factory Crimp Rifle Die 7x57mm Mauser

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90839 FACT...

Lee

Lee 90840 Factory Crimp Rifle Die 7mm-08 Remington Magnum

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90840 FACT...

Lee

Lee 90841 Factory Crimp Rifle Die 7mm Express

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90841 FACT...

Lee

Lee 90843 Factory Crimp Rifle Die 30-40 Krag

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90843 FACT...

Lee

Lee 90844 Factory Crimp Rifle Die 300 Savage

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90844 FACT...

Lee

Lee 90849 Factory Crimp Rifle Die 338 Winchester Magnum

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90849 FACT...

Lee

Lee 90852 Factory Crimp Rifle Die 38-40 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90852 FACT...

Lee

Lee 90853 Factory Crimp Rifle Die 38-55 Winchester

LEE 90853 FACT CRIMP DIE 38-55 WIN Mfg Item Num: 90853 Model Number: Factory Purpose: Reloading Series: Rifle Unit of measure: EA Type: Factory Crimp Rifle DieCaliber: 38-55 WinchesterIn Set: 1

Lee

Lee 90854 Factory Crimp Rifle Die 44-40 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90854 FACT...

Lee

Lee 90855 Factory Crimp Rifle Die 444 Marlin

Lee's Carbide 3-Die Set for handgun calibers consists of a full-length sizing die (requires case lubrication) bullet seating die and powder through expander die. It includes a Universal Shell Holder Powder Dipper and Instructions/Load Data all packaged...

Lee

Lee 90856 Factory Crimp Rifle Die 45-70 Government

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90856 FACT...

Lee

Lee 90905 Factory Crimp Rifle Die 375 Winchester

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90905 FACT...

Lee

Lee 90926 Collect 460 Smith & Wesson Magnum Crimp Die Set

This Collect Die is popular with cast bullet shooters that wish to use over size bullets also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or...

Lee

Lee 90930 Collect 44 Remington Magnum Crimp Die Set

This Collect Die is popular with cast bullet shooters that wish to use over size bullets also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or...

Lee

Lee 90931 Collect 500 Smith & Wesson Crimp Die

This Collet Die is popular with cast bullet shooters that wish to use over size bullets also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or...

Lee

Lee 90962 Factory Crimp Rifle Die 270 Winchester Short Magnum

This Factory Die incorporates a collet to apply a rifle type crimp to the case which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. LEE 90962 FACT...

Lee

Lee 90580 Poweder Through Expanding Pistol Die 9mm Luger

Lee's Powder Thru Expanding Die charges the case while expanding the case mouth. It is used with a powder funnel adapter or the Auto Disk or Pro Auto Disk Powder Measure. LEE 90580 POWDER THRU DIE EXP 9MM Mfg Item Num: 90580 Model Number: Poweder...