Lee

38 SPECIALLEE TAPER CRIMP DIE

LEE TAPER CRIMP DIE38 SPECIALFEATURES-Taper Crimp Die for .38 Special-Overcomes crimp problems caused by poor design-Offers little or no advantage when used with 1986 or newer Lee dies as the crimp...

LEE FACTORY CRIMP DIE 6MM ARC

LEE FACTORY CRIMP DIE 6MM ARC

270 WINCHESTERLEE QUICK TRIM DIE BODY

LEE QUICK TRIM DIE BODY270 WINCHESTERFEATURES-Quick trim die for .270 Winchester

LEE DECAPPER .223

LEE DECAPPER .223FEATURES-For Lee Loader .22 Hornet and decapper & base .22 caliber

300 WSMLEE FACTORY CRIMP DIE ONLY

LEE FACTORY CRIMP DIE ONLY300 WSMFEATURES:-Caliber: 300 Winchester Short Magnum-Factory Crimp-Threads: 7/8" - 14

45-70 GOVERNMENTLEE QUICK TRIM DIE BODY

LEE QUICK TRIM DIE BODY45-70 GOVERNMENTFEATURES-Quick trim die for .45-70 Government

45 LONG COLTLEE CARBIDE SIZER DIE ONLY

LEE CARBIDE SIZER DIE ONLY45 LONG COLTFEATURES-For .45 Colt, .455 Web Mark 2, .454 Casull-Carbide full length sizing die only-No case lube needed

7.62X39LEE FACTORY CRIMP DIE ONLY

LEE FACTORY CRIMP DIE ONLY7.62X39FEATURES-Factory crimp die for 7.62x39-Crimps bullet in place more firmly than any other tool-A firm crimp improves accuracy-Higher start pressure insures a more...

22 HORNETLEE FACTORY CRIMP DIE ONLY

LEE FACTORY CRIMP DIE ONLY22 HORNETFEATURES-Factory crimp die for .22 Hornet-Crimps bullet in place more firmly than any other tool-A firm crimp improves accuracy-Higher start pressure insures a more...

Lee Precision 91018 Collet Neck Die ONLY 30-30 Winchester

7.62X39 RUSSIANLEE QUICK TRIM DIE BODY

LEE QUICK TRIM DIE BODY7.62X39 RUSSIANFEATURES-Quick trim die for 7.62x39 Russian

Lee Precision 90033 Quick Trim Pistol 40 S&W

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee Precision 90864 Carbide Factory Crimp Die 45 ACP

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90956 Collet Die Only 243 Win

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

Lee Precision 90867 Carbide Factory Crimp Die 380 ACP

A carbide sizer die sizes the cartridge while it is being crimped. The adjusting screw quickly and easily sets the desired amount of crimp. Revolver dies roll crimp. A perfect taper crimp is applied...

44-40 WINCHESTERLEE FACTORY CRIMP DIE ONLY

LEE FACTORY CRIMP DIE ONLY44-40 WINCHESTERFEATURES-Factory crimp die for .44/40 Winchester-Crimps bullet in place more firmly than any other tool-A firm crimp improves accuracy-Higher start pressure...

Lee Precision 90530 Carbide Sizing Die Multi-Caliber

Lee's Carbide Factory Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The adjusting...

308 WINCHESTERLEE QUICK TRIM DIE BODY

LEE QUICK TRIM DIE BODY308 WINCHESTERFEATURES-Quick trim die for .308 Winchester

Lee Precision 90689 Quick Trim Die 300 Blackout

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee Precision 90841 Factory Crimp Die 7mm Express / 280 Rem

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90954 Collet Die Only 223 Rem

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

Lee Precision 90821 Factory Crimp Die 7mm Rem Mag

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

6.5 GRENDELLEE QUICK TRIM DIE BODY

LEE QUICK TRIM DIE BODY6.5 GRENDELFEATURES:-Quickly & precisely trims your brass to the correct length at the same time it chamfers the inside & outside of the case mouth-No calipers,...

Lee Precision 90839 Factory Crimp Die 7x57mm Mauser

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...