Lee

308 WINCHESTERLEE FULL LENGTH 3-DIE SET

LEE FULL LENGTH 3-DIE SET308 WINCHESTERFEATURES-Pacesetter 3 die set for .308 Winchester-Full length sizing die-Bullet seating die-Factory crimp die-Universal shell holder-Powder...

Lee Precision 90866 Carbide Factory Crimp Die 38 Super

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90067 Carbide Factory Crimp Die 32 S&W Long/32 H&R Mag

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90709 Collet 2-Die Set 243 Win

Lee's Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder...

Lee Precision 90076 Factory Crimp Die 357 Sig

Lee's Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves...

Lee Precision 90298 Pacesetter 3-Die Set 260 Rem

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90840 Factory Crimp Die 7mm-08 Rem

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

LOCK BUSHINGS 38 SPL & 357 MAGLEE CARBIDE 3-DIE SET & BREECH

LEE CARBIDE 3-DIE SET & BREECHLOCK BUSHINGS 38 SPL & 357 MAG

Lee Precision 90981 Pacesetter 3-Die Set 223 Ackley Improved

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90575 Pacesetter 3-Die Set 300 Blackout

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 91492 Factory Crimp Die 6.5 PRC

6.5 PRC Factory Crimp Die in 7/8 x 14" thread.

Lee Precision 92179 Factory Crimp Die 22 Creedmoor

Lee Precision 90769 Steel 3-Die Set 7.62x25mm Tokarev

Lee's Steel 3-Die Set for handgun calibers consists of a full-length sizing die (requires case lubrication), bullet seating die, and powder through expander die. It includes a Universal Shell Holder,...

Lee Precision 90562 Pacesetter 3-Die Set 444 Marlin

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 92188 Pacesetter 3-Die Set 22 ARC

Lee 22 ARC PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, and instructions. Select this die set if you...

44 SPECIAL & 44 MAGNUMLEE CARBIDE FACTORY CRIMP DIE

LEE CARBIDE FACTORY CRIMP DIE44 SPECIAL & 44 MAGNUMFEATURES-For .44 Special, .44 Magnum, .44 Russian-Sizes the cartridge while being crimped-Every round will positively chamber freely-Applies a roll...

Lee Precision 90179 Quick Trim Die 223 Rem

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee Precision 90624 Carbide 3-Die Set 32 S&W Long

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90525 Shell Holder Universal #8R 32 Win / 348 Win / 40/65 / 45/70

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

LEE AUTO-PRIME SHELLHOLDER #1

LEE AUTO-PRIME SHELLHOLDER #1FEATURES-#1 priming tool shell holder-For .38 Long & Short Colt, .38 Special,.357 mag & similar

AUTO-DISK POWDER MEASURELEE LONG CHARGING DIE FOR

LEE LONG CHARGING DIE FORAUTO-DISK POWDER MEASUREFEATURES-Long charging die for use with the Auto-Disk, Pro-Disk and Auto-Drum Powder Measure-Works with cases 1.760 to 2.620" long-.223 Remington to ...

Lee Precision 90768 Pacesetter 2-Die Set 8mm Lebel

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, powder dipper and instructions/load data.

Lee Precision Breech Lock 3-Die Set 40 S&W

Lees 40 S&W Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal...

Lee Precision 90961 Collet Die Only 300 Win Mag

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.