Lee

Lee Precision 90841 Factory Crimp Die 7mm Express / 280 Rem

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90954 Collet Die Only 223 Rem

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

7.5X54 MAUSERLEE FULL LENGTH 3-DIE SET

LEE FULL LENGTH 3-DIE SET7.5X54 MAUSERFEATURES-Pacesetter 3 die set for 7.5x54 Mauser-Full length sizing die-Bullet seating die-Factory crimp die-Universal shell holder-Powder...

Lee Precision 90821 Factory Crimp Die 7mm Rem Mag

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90510 Carbide 3-Die Set 38 Special / 357 Mag

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

6.5 GRENDELLEE QUICK TRIM DIE BODY

LEE QUICK TRIM DIE BODY6.5 GRENDELFEATURES:-Quickly & precisely trims your brass to the correct length at the same time it chamfers the inside & outside of the case mouth-No calipers,...

6.5 JAPANESELEE FULL LENGTH 2-DIE SET

LEE FULL LENGTH 2-DIE SET6.5 JAPANESEFEATURES-Full length 2 die set for 6.5 JAP-Full length sizing die-Bullet seating die-Universal shell holder-Powder dipper-Instructions/load data

Lee Precision 90839 Factory Crimp Die 7x57mm Mauser

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90558 Pacesetter 3-Die Set 300 Wthby Mag

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 92223 Micrometer Bullet Seating Die Black/Clear 6.5 Creedmoor Rifle Firearm

Lee Precision 90838 Factory Crimp Die 7-30 Waters

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90959 Collet Die Only 308 Win

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

Lee Precision 90862 Carbide Factory Crimp Die 40 S&W 10mm Auto

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90942 Pacesetter 3-Die Set 300 WSM

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

7.7 JAPANESELEE FULL LENGTH 3-DIE SET

LEE FULL LENGTH 3-DIE SET7.7 JAPANESEFEATURES-Pacesetter 3 die set for 7.7 Japanese-Full length sizing die-Bullet seating die-Factory crimp die-Universal shell holder-Powder dipper-Instructions/load...

Lee Precision 90766 Pacesetter 2-Die Set 7.35 Carcano

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder and instructions/load data.

Lee Precision 90822 Factory Crimp Die 30-30 Win

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90506 Pacesetter 3-Die Set 30-30 Win

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90968 Carbide 4-Die Set 45 ACP

Lee's 4-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

243 WINCHESTERLEE ULTIMATE 4-DIE RIFLE SET

LEE ULTIMATE 4-DIE RIFLE SET243 WINCHESTERFEATURES-Ultimate 4-die set for .243 Winchester-Full length resizing die-Collet necksizing die-Easy adjust dead length bullet seating die-Factory Crimp...

Lee Precision 90534 Lock Die Rings

Lee Billet Aluminum Lock Rings are easy to adjust, just finger tighten, holds the adjustment rock solid. Package of 3

LEE AUTO-PRIME SHELLHOLDER #2

LEE AUTO-PRIME SHELLHOLDER #2FEATURES-#2 priming tool shell holder-For .25/06, 7mm/08, 8x57 Mauser, .45 ACP& similar

9MM LUGER!LEE CARBIDE SIZER DIE ONLY

LEE CARBIDE SIZER DIE ONLY9MM LUGER!FEATURES-For 9mm Luger-Carbide full length sizing die only-No case lube needed

Lee Precision 90944 Breech Lock Pro Shell Plate #19 40S&W / 9mm / 10mm / 38 Super / 38 Auto / 41 AE

Works with cartridge: 40 S&W, 10mm Auto, 9mm Luger, 38 Super, 38 Auto, 41 AE.