Lee

Lee Precision 90866 Carbide Factory Crimp Die 38 Super

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 92117 Breech Lock Hand Press Kit 45 ACP

Lee Precision 90067 Carbide Factory Crimp Die 32 S&W Long/32 H&R Mag

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90709 Collet 2-Die Set 243 Win

Lee's Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder...

Lee Precision 90076 Factory Crimp Die 357 Sig

Lee's Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves...

Lee Precision 90298 Pacesetter 3-Die Set 260 Rem

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90840 Factory Crimp Die 7mm-08 Rem

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90981 Pacesetter 3-Die Set 223 Ackley Improved

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90575 Pacesetter 3-Die Set 300 Blackout

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90263 Lee Loader Classic 45 Colt (LC)

Lee Loader is a complete reloading system, kit includes everything needed to reload 45 Colt. except a rubber mallet, that is not included.

Lee Precision 92179 Factory Crimp Die 22 Creedmoor

Lee Precision 90769 Steel 3-Die Set 7.62x25mm Tokarev

Lee's Steel 3-Die Set for handgun calibers consists of a full-length sizing die (requires case lubrication), bullet seating die, and powder through expander die. It includes a Universal Shell Holder,...

Lee Precision 90562 Pacesetter 3-Die Set 444 Marlin

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90634 Pro 1000 Reloading Kit 44 Special / 44 Mag

Lee Pro 1000 progressive 3-hole reloading kit for 44 Special/44 Magnum. Includes press, dies (Carbide Full Length Size, Powder Through Expanding and Bullet Seating dies), 3-Hole Turret, #11 Shell...

Lee Precision 92188 Pacesetter 3-Die Set 22 ARC

Lee 22 ARC PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, and instructions. Select this die set if you...

LEE 92201 READY TO CAST KIT W/MOLD 110 VOLT

Lee Precision 90283 Mold Double Cavity Round Ball .530 Diameter Aluminum/Wood Capacity 2 Bullets

Lee's Double Cavity Ball Round Mold produces two balls in the specified size suitable for black powder firearms. These round ball molds have a tangential cut off which eliminates the objectional nib...

Lee Precision 90382 Mold Double Cavity Conical Bullet .450 44 Cal Aluminum/Wood Capacity 2 Bullets

Lee's Double Cavity Conical Bullet Mold for black powder revolvers produces a super accurate round nose bullet that is easy to load straight and true. Two lube grooves prevent flash ignition and lead...

Lee Precision 90179 Quick Trim Die 223 Rem

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee Precision 90947 Pro 4-20 Silver Metal

Lee's Pro 4-20 pot has all the great features of the Pro 20 pot, plus a generous 4 inches of clearance under the spout to accept all brands of bullet molds and most sinker molds. It also includes an...

Lee Precision 90640 Pro 1000 Reloading Kit 9mm 3 Hole

Lee's Pro 1000 progressive 3-hole reloading kit for 9mm Luger includes press, dies (carbife full length size, powder through expanding and bullet seating dies), 3-hole turret, #19 shell plate, Pro...

Lee Precision 90624 Carbide 3-Die Set 32 S&W Long

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90525 Shell Holder Universal #8R 32 Win / 348 Win / 40/65 / 45/70

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

Lee Precision 90768 Pacesetter 2-Die Set 8mm Lebel

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, powder dipper and instructions/load data.