Magazines

Pearce Grip for GLOCK GEN 4 model (26/27/33) plus extension

These units replace the magazine base plate and internal floor plate. They will add two rounds to the Glock M26 one round to the Glock M27 and M33 and no rounds to the Glock M39. These units will add 5/8" additional length for better control and comfort...

Pearce Grip Grip Extension for Glock Gen 4 & 5 Model 27 & 27

These units replace the magazine base plate and retain all other factory components. They do not alter the capacity of the magazine. These units will add 5/8" additional length for better control and comfort.

Pearce Grip Mag Extension for Beretta Nano

An extension for the Beretta NANO. This extension replaces the magazine floor plate adding approximately 3/4" additional length and incorporates the factory checkering pattern resulting in better control and comfort without altering the capacity of...

Pearce Grip PG1045+ Magazine Extension Extended 10mm Auto/45 ACP 2rd Compatible w/Glock Gen 4 20/29/40/41, Black Polymer

The Pearce extension replaces the magazine floor plate adding two rounds capacity to Glock factory 20/21/29/40/41 magazines. This unit is for use on high capacity magazines only, it will not work on the 10 round M20 and M21 magazines. Not for use on...

Pearce Grip PG26XL Grip Extension made of Polymer with Black Textured Finish & 1" Gripping Surface for Glock 26, 27, 33 & 39

This grip extension replaces the magazine base plate and retain all other factory components. It does not alter the capacity of the magazine and adds 1" additional length resulting in better control and comfort.

Pearce Grip PG36 Grip Extension made of Polymer with Black Finish for Glock 36

This grip extension replaces the magazine base plate and retain all other factory components. It does not alter the capacity of the magazine and provide extra length for better control and comfort.

Pearce Grip PG39 Magazine Extension Extended Compatible w/Glock 26/27/3339, Black Polymer

These units replace the magazine base plate and internal floor plate. They will add three rounds to the Glock 26, two rounds to the Glock 27/33 and one round to the Glock 39. They also add 1" additional length for better control and comfort.

Pearce Grip PG43+1 Magazine Extension made of Polymer with Black Finish & 3/4" Gripping Surface for Glock 43 (Adds 1rd)

This extension replaces the magazine floor plate providing one extra round of capacity and approximately 3/4" additional gripping surface for better control and comfort while also incorporating the factory texture pattern.

Pearce Grip PG48 Grip Extension made of Polymer with Texture Black Finish & 5/8" Gripping Surface for 9mm Luger Glock 43X, 48

This grip extension replaces the magazine floor plate adding approximately 5/8" additional length resulting in better control and comfort without altering the capacity of the factory magazine. It incorporates the factory texture pattern as well as an...

Pearce Grip PGXD45 Grip Extension made of Polymer with Black Finish & 5/8" Gripping Surface for 45 ACP Springfield XD Mod.2, XDM, XD

This grip extension replaces the magazine base plate. It does not alter the capacity of the magazine but, adds approximately 5/8 inch additional gripping surface. Note: This extension will fit the XDM 45 and the Mod 2 45 models, however the checkering...

Pearce M&P 9mm SHIELD PLUS grip extension for 10 rd mag

This unit replaces the magazine base plate on the M&P 9 SHIELD PLUS and 30 Super Carry. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface and incorporates a texture pattern...

PEARCE PLUS FOR GLOCK MID/FULL SIZE

This unit adds capacity to Mid and Full Size Glock high capacity magazines. This magazine extension replaces the original floor plate and internal locking plate and adds three rounds to a 9mm; two rounds to a 40SW and 357SIG, and one round to a 45GAP...

MAGAZINE PLUG 20GA

RemArms, LLC, MFG# R17677, UPC: 810070687458, UOM: EA, Magazine Plug, 12 gauge, 3-round, REMI, REMIPT72, REMIPTALL, PT72, PTALL, Case: 6

Ruger Finger Extension For SR9C & SR40C

Black plastic finger extension for the 10-round SR9c® and the 9-round SR40c® magazines.

RUGER SR9C/SR40C 17RD MAGAZINE SLEEVE

This matching grip extension adapter for the SR9c extends the grip frame when using the 17 round magazine. Note: 17 round magazines are not available in all locations.

ETS GLOCK 9MM Mag inserts RRS- RED | FITS GLOCK 17,19,26 | 2 PACK

Specifications and Features:ETS Rapid Recognition SystemFor use in ETS MagazinesEasy identification2 followers2 base insertsPolymerRedFits:ETS 17/19/26 9mm GLOCK magazines only (Will not fit 43)

10RD MAG CATAMOUNT FURY II

10RD MAG CATAMOUNT FURY II

Pearce Grip Grip Extension for SIG P365 X/XL 10 or 12/rd Mag

This unit replaces the magazine base plate on the SIG P365X/XL (12 round/10 round magazines). Does not alter the capacity of the magazine.Features:  It adds approximately 1/2" inch additional gripping surface as well as enhanced ergonomics. The...

ProMag LDR02 Pistol Mag Loader Double Stack Style made of Polymer with Black Finish for 9mm Luger, 40 S&W

ProMag's pistol magazine loader for 9mm & .40 S&W double stack magazines, has a top dimension of 1-5/16" x 13/16" or smaller. Made in the USA.

ProMag LDR03 Pistol Mag Loader 1911 Type Single Stack Style made of Polymer with Black Finish for 45 ACP Colt 1991 Series

Made in the USA, this pistol magazine loader is for all Colt 1991 series pistols with single stack magazines in .45 ACP. It is constructed of an injection molded black polymer.

Refurbish / Dent / Scratch LU30B LULA Loader & Unloader Black Polymer 22 LR Ruger 10/22 *Worn, No Pkg

The Maglula Loader/Unloader is simple to use in either loading or unloading mode. The loader/unloader eliminates thumb pain, wear on feed lips, and prolongs magazine life. It is crafted from durable reinforced polymer, lightweight, and is reliable in all...

Kel-Tec S2K221 SUB2000 Magazine Sleeve Fits Glock 17 Gen3 Black Polymer

Refurbish / Dent / Scratch MA594 TP9SF Elite 9mm Luger 10 Round Steel Silver Finish

This magazine is for your Century Arms TP9SF Elite firearm.

Refurbish / Dent / Scratch UP65G 1911A1 Aligner Insert Single Stack Gray Polymer Multi-Caliber 1911 *Bagged

Maglula's Aligning Insert is an add-on for the UpLULA and 22UpLULA loaders. It assist loading single-stack magazines by eliminating wiggling of the mag inside the loader. It connects to and is used with an existing loader. The 1911AI inserts is packed...