Lee

Lee Precision 90891 Bullet Feed Kit Die and Fingers 45 Cal , .50" Up To .67" Long

Lee Feed Die and Fingers converts the Bullet Feed Kit to another caliber or length of bullet with the Bullet Feed Kit Accessory. This model is used for 45 cal bullets, with lengths from .50" up to ...

Lee Precision 90532 Carbide Sizing Die 45 ACP

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90659 Breech Lock Pro Shell Plate #16 500 S&W / 7.62 x 54R

Works with cartridge: 500 S&W and 7.62x54R.

Lee Precision 90088 Quick Trim Pistol 357 Mag

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee Precision 90292 Decapping Die Up To .560" Diameter

With Lee's Decapping Die, no cleaning or lubing of cases is necessary. It even removes crimped primers. This die fits cases up to .560" in diameter and up to 3.125" long.

308 WINCHESTER & 303 SAVAGELEE FACTORY CRIMP DIE ONLY

LEE FACTORY CRIMP DIE ONLY308 WINCHESTER & 303 SAVAGEFEATURES-Factory crimp die for .308 Winchester & .303 Savage-Crimps bullet in place more firmly than any other tool-A firm crimp improves...

Lee Precision 90291 Quick Trim Die 30-06 Springfield

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

45-70 GOVERNMENTLEE FULL LENGTH 3-DIE SET

LEE FULL LENGTH 3-DIE SET45-70 GOVERNMENTFEATURES-Pacesetter 3 die set for .45-70 Government-Full length sizing die-Bullet seating die-Factory crimp die-Universal shell holder-Powder...

Lee Precision 90752 Pacesetter 2-Die Set 35 Whelen

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder and instructions/load data.

Lee Precision 90541 Pacesetter 3-Die Set 7x57mm Mauser

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90552 Pacesetter 3-Die Set 280 Rem

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90798 Universal Case Expanding Die

Lee's Universal Flaring Die gently flares the case mouth to accept cast bullets without shaving. Includes neck plugs for .22 cal through .45 cal

Lee Precision 90784 Taper Crimp Die 44 Special / 44 Mag

Lee 44 SPECIAL/44 MAG Taper Crimp Die, overcomes crimp problems caused by poor die design. Offers little or no advantage when used with 1986 or newer Lee Dies as the crimp angle is already a modified...

Lee Precision 90819 Factory Crimp Die 243 Win

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision Six Pack Pro Shell Plate /Multi-Caliber/Size 3L

270 WINCHESTERLEE FACTORY CRIMP ONLY

LEE FACTORY CRIMP ONLY270 WINCHESTERFEATURES-Factory crimp die for .270 Winchester-Crimps bullet in place more firmly than any other tool-A firm crimp improves accuracy-Higher start pressure insures...

Lee Precision 90883 RGB 2-Die Set 8x57 Mauser

Lee's RGB (Really Great Buy) series consists of the Full Length Sizing Die, Dead Length Easy Adjust Bullet Seating Die, and Instructions. These dies produce factory-dimensioned ammo to reliably fit...

308 WINCHESTERLEE FULL LENGTH 3-DIE SET

LEE FULL LENGTH 3-DIE SET308 WINCHESTERFEATURES-Pacesetter 3 die set for .308 Winchester-Full length sizing die-Bullet seating die-Factory crimp die-Universal shell holder-Powder...

Lee Precision 90866 Carbide Factory Crimp Die 38 Super

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90067 Carbide Factory Crimp Die 32 S&W Long/32 H&R Mag

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90709 Collet 2-Die Set 243 Win

Lee's Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder...

Lee Precision 90076 Factory Crimp Die 357 Sig

Lee's Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves...

Lee Precision 90298 Pacesetter 3-Die Set 260 Rem

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90840 Factory Crimp Die 7mm-08 Rem

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...