Lee

Lee Precision 90993 Case Length Gauge 260 Rem

Lee 260 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.015 to 2.035 inches.

Lee Precision 90959 Collet Die Only 308 Win

Lee's Collet Die uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

Lee Precision 90862 Carbide Factory Crimp Die 40 S&W 10mm Auto

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Precision 90685 Breech Lock Hand Press

The Breech Lock Hand Press is a full size reloading press with an overall length of 11.5". It gives you plenty of stroke with lots of power to handle the largest magnum cartridges. One Breech Lock...

Lee Precision 90942 Pacesetter 3-Die Set 300 WSM

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90766 Pacesetter 2-Die Set 7.35 Carcano

Lee's PaceSetter 2-Die Set includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder and instructions/load data.

Lee Precision 90822 Factory Crimp Die 30-30 Win

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90700 Auto Bench Prime

This bench mounted priming tool features a symmetrical design allows effortless right or left hand operation. Its comfortable lever with just the right amount of mechanical advantage seats even the...

Lee Precision 90506 Pacesetter 3-Die Set 30-30 Win

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90968 Carbide 4-Die Set 45 ACP

Lee's 4-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Precision 90269 4 Hole Turret

Lee's Aluminum 4-hole Turret for quick caliber change is compatible with the 4-Hole Turret Press and Classic Turret Press. This 4 hole turret will not fit inside the Pro 1000 or 3 Hole Turret Press.

Lee Precision 92280 Reloader Press 9mm

Lee Precision 90235 Lee Loader 243 Win

Lee Loader is a complete reloading system, kit includes everything needed to reload 243 Win, except plastic or wood mallet. Please note: The Classic Lee Loader neck sizes only. This is not...

Lee Precision 90939 Ultimate Rifle 4 Die Set 6.5 Creedmoor

Lee's Ultimate Rifle 4-Die Set for maximum versatility. The set features a full length-resizing die to return brass to factory new dimensions, perfect for reloading brass fired in other guns. The...

Lee Precision 90875 RGB 2-Die Set 270 Win

Lee's RGB (Really Great Buy) series consists of the Full Length Sizing Die, Dead Length Easy Adjust Bullet Seating Die, and Instructions. These dies produce factory-dimensioned ammo to reliably fit...

Lee Precision 90459 Six Cavity Mold 22 Cal

Lee's Six Cavity Mold is made for heavy duty volume production. The mold blocks have steel bushing and alignment pins for lasting precision. Included is a cam operated sprue plate to eliminate the...

Lee Precision 90534 Lock Die Rings

Lee Billet Aluminum Lock Rings are easy to adjust, just finger tighten, holds the adjustment rock solid. Package of 3

Lee Precision 90896 Bullet Feed Kit 40 - 44 Cal Bullets Up To .65" Long

Lee Bullet Feed Fit Automatically feeds bullets into the mouth of the bullet seating die for pistol calibers only. Can be used on the Pro 1000, Pro 4000, Auto Breech Lock Pro or Load-Master Presses...

Lee Precision 92031 Gauge Holder 7mm PRC

Lee's 7mm PRC Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit.

Lee Precision 90944 Breech Lock Pro Shell Plate #19 40S&W / 9mm / 10mm / 38 Super / 38 Auto / 41 AE

Works with cartridge: 40 S&W, 10mm Auto, 9mm Luger, 38 Super, 38 Auto, 41 AE.

Lee Precision 90651 Pro 1000 Shell Plate #1 38 Special / 357 Mag

Quick change shell plates allow you to change from one caliber to another in a matter of minutes. When changing to another caliber with a different primer size, be sure to order the Pro 1000 primer...

Lee Precision 90843 Factory Crimp Die 30-40 Krag

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee Precision 90011 Load-All II Shotshell Reloader 12 Gauge

Lee Load-All II complete reloading tool for 12 gauge with 24 shot and powder bushings. Loads 2 3/4" and 3" shells.

Lee Precision 90500 Pacesetter 3-Die Set 22 Hornet

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.